One, to open the wireless function

Before you set the password to open the wireless network function, first login to the wireless router, find the radio settings - the basic settings".

In the basic settings of the wireless network, the selection of the function of the open wireless network".

Note: the user must check the "open SSID broadcast", or the client cannot search to the wireless network, the other parameters remain the default, WDS function is used for interconnection between multiple wireless routers to extend the wireless network coverage, generally less than. At this point, the function of the wireless network to open, save and restart the wireless router into effect.

Two, set the wireless password

Switch to wireless settings - wireless security settings page, configure the wireless password related parameters, for the protection of network security, strongly recommended on the security settings, encryption method and use the WPA/WPA2 personal edition of AES (commonly used wireless encryption methods please see several wireless routers often use encryption methods detailed article, detailed introduction).

Three, the type of certification

You can choose WPA or WPA2, the default is to maintain the automatic, the advantage is that if the host system does not support the WPA2 can also be used with the wireless router to negotiate with the host system to support the type of authentication.

Encryption algorithm: you can choose TKIP or AES, with respect to the latter, AES encryption algorithm is more excellent.

Four, PSK password

This is the client to enter the wireless network needs to enter the password content, and at least 8 characters.

Five, group key update cycle

Group key is to protect data security settings, seemingly useless, keep the default settings can be.