DESCRIPTION
The Cisco ATA 187 Analog Telephone Adaptor is a handset-to-Ethernet adaptor that turns traditional telephone devices into IP devices. Customers can take advantage of many exciting IP telephony applications by connecting their analog devices to Cisco ATAs.
PRODUCT DETAILS |
Device Type |
VoIP phone adapter |
Enclosure Type |
External |
Dimensions (WxDxH) |
17 cm x 13.7 cm x 3.8 cm |
Weight |
260 g |
Data Link Protocol |
Ethernet, Fast Ethernet |
Network / Transport Protocol |
TCP/IP, UDP/IP, ICMP/IP, DHCP |
Remote Management Protocol |
TFTP |
VoIP Protocols |
SIP |
Telephony Interfaces |
2 phone (FXS) |
Power |
AC 120/230 V |
GENERAL |
Device Type |
VoIP phone adapter |
Width |
17 cm |
Depth |
13.7 cm |
Height |
3.8 cm |
Weight |
260 g |
PROCESSOR / MEMORY / STORAGE |
Hard Drive |
None. |
NETWORKING |
Form Factor |
External |
Connectivity Technology |
Wired |
Framing Format |
G.711 |
Data Link Protocol |
Ethernet, Fast Ethernet |
Network / Transport Protocol |
TCP/IP, UDP/IP, ICMP/IP, DHCP |
Remote Management Protocol |
TFTP |
Features |
Full duplex capability, dynamic IP address assignment , DHCP support, VLAN support, firmware upgradable, Quality of Service (QoS), static IP mode |
Encryption Algorithm |
TLS |
Compliant Standards |
IEEE 802.1Q |
IP TELEPHONY |
VoIP Protocols |
SIP |
Voice Codecs |
G.711, G.729, G.729a, G.729ab, G.711u, G.711a, T.38 |
Telephony Interfaces |
2 phone (FXS) |
IP Telephony Features |
Echo cancellation, comfort noise generation (CNG), voice activity detection (VAD), call forwarding, Caller ID, call waiting, automatic fax/modem detection and pass-through |
EXPANSION / CONNECTIVITY |
Interfaces |
1 x network - Ethernet 10Base-T/100Base-TX - RJ-45
2 x phone line - FXS - RJ-11 |
MISCELLANEOUS |
MTBF |
100,000 hour(s) |
Compliant Standards |
RoHS, WEEE |
POWER |
Power Device |
Power adapter - external |
Voltage Required |
AC 120/230 V |
ENVIRONMENTAL PARAMETERS |
Min Operating Temperature |
5 °C |
Max Operating Temperature |
45 °C |
Humidity Range Operating |
5 - 95% |
|